document number: 68008 for technical questions, contact: te1resistors@vishay.com www.vishay.com revision: 17-mar-08 1 mrcn vishay techno resistor/capacitor networks, molded sip features ? custom schematics available ? np0 or x7r capacitors for line terminator ? wide operating temperature range (- 55 c to 125 c) ? molded epoxy case ? solder coated copper terminals ? solderability per mil-std-202 method 208e ? marking resistance to solvents per mil-std-202 method 215 notes (1) 1 % tolerance available on request (2) np0 capacitors may be subs tituted for x7r capacitors (3) tighter tolerances available on request note ? custom schematics available standard electrical specifications model schematic resistor characteristics capacitor characteristics power rating p 70 c w resistance ( ) resistance tolerance % temp. coeff. ppm/c type (2) capacitance range capacitance tolerance (3) % capacitance voltage vdc mrcn 10 0.20 50 - 1k 2 %, 5 % (1 %) (1) 150 ppm np0 33 pf - 3900 pf 10 %, 20 % 50 x7r 470 pf - 0.1 f 10 %, 20 % 20 0.20 50 - 1k 2 %, 5 % (1 %) (1) 150 ppm np0 33 pf - 3900 pf 10 %, 20 % 50 x7r 470 pf - 0.1 f 10 %, 20 % 30 0.20 50 - 1k 2 %, 5 % (1 %) (1) 150 ppm np0 33 pf - 3900 pf 10 %, 20 % 50 x7r 470 pf - 0.1 f 10 %, 20 % schematics 8 c rr rr r r 1 2 3 4567 schematic 10 10k ecl terminator network r rr cc c 1234 n-1 n schematic 20 rrrrrr cc 1 2 345678910 100k ecl terminator network schematic 30 dimensions in inches [millimeters] number of pins a 0.010 [0.254] b 0.010 [0.254] c 0.010 [0.254] 8 0.780 [19.81] 0.345 [8.26] 0.040 [1.02] 10 1.040 [26.42] 0.346 [8.79] 0.075 [1.91] a b c #1 pin 0.150 0.010 [3.81 0.254] 0.010 0.002 [0.254 0.051] 0.020 0.002 [0.508 0.051] 0.100 0.005 non-cumulative 0.125 0.015 [3.18 0.381] 0.020 0.002 [0.508 0.051] (seating plane) pin #1 identifier [2.54 0.127] global part number information new global part numbering: mrcn081n101j560ktb (preferred part number format) global model pin count schematic characteristic resistance value resistance tolerance capacitance value capacitance tolerance terminal finish pac k ag i n g mrcn 08 = 8 pin 10 = 10 pin 1 = 10 2 = 20 3 = 30 n = np0 x = x7r 2 digit significant figure, followed by a multiplier 101 = 100 220 = 22 102 = 1 k f = 1 % g = 2 % j = 5 % (in picofarads) 2 digit significant figure, followed by a multiplier 101 = 100 pf 392 = 3000 pf 104 = 0.1 f k = 10 % m = 20 % t = sn90/pb10 b = bulk t = tray historical part numbering: mrcn0801101j56 0ks10 (will continue to be accepted) mrcn 08 01 101 j 560 k s10 historical model pin count schematic resistance value resistance tolerance capacitance value capacitance tolerance terminal finish n08 n1 1 rc 01j b m 6 5 0 k t
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
